Linux error 大全

   2023-02-09 学习力0
核心提示:/usr/include/asm-generic/errno-base.h #ifndef _ASM_GENERIC_ERRNO_BASE_H#define _ASM_GENERIC_ERRNO_BASE_H #define EPERM 1 /* Operation not permitted */#define ENOENT 2 /* No such file or directory */#define ESRCH 3 /* No such process */#de

/usr/include/asm-generic/errno-base.h

 

#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H

 

#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */

 

#endif


errno.h

 

#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H

 

#include <asm-generic/errno-base.h>

 

#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */

 

#define EDEADLOCK EDEADLK

 

#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */

 

#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED 125 /* Operation Canceled */
#define ENOKEY 126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED 129 /* Key was rejected by service */

 

/* for robust mutexes */
#define EOWNERDEAD 130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */

 

#define ERFKILL 132 /* Operation not possible due to RF-kill */

 

#endif



 
反对 0举报 0 评论 0
 

免责声明:本文仅代表作者个人观点,与乐学笔记(本网)无关。其原创性以及文中陈述文字和内容未经本站证实,对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺,请读者仅作参考,并请自行核实相关内容。
    本网站有部分内容均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,若因作品内容、知识产权、版权和其他问题,请及时提供相关证明等材料并与我们留言联系,本网站将在规定时间内给予删除等相关处理.

  • 【强转】QEMU+GDB调试linux内核全过程
    【强转】QEMU+GDB调试linux内核全过程
    昨天更新了一篇名为《QEMU+GDB调试linux内核全过程》[link][https://blog.csdn.net/weixin_37867857/article/details/88138432]的博客,发现排版比较混乱,而且思维也比较混乱。咋一看下来简直是惨不忍睹,而且会给读者在安装过程中一种云里雾里的感觉,加上
    03-08
  • Linux下Bochs,NASM安装和使用 linux bom
    Linux下Bochs,NASM安装和使用 linux bom
    以Ubuntu为例,先更新一下:sudo apt-get updatesudo apt-get upgrade然后安装Bochs环境:sudo apt-get install build-essential xorg-dev libgtk2.0-dev安装NASMNASM官网下载,这以nasm-2.14.02.tar.gz为例:用tar zxvf nasm-2.14.02.tar.gz解压后编译安装cd
    03-08
  • 把玩Alpine linux(一):安装
    把玩Alpine linux(一):安装
    导读Alpine Linux是一个面向安全应用的轻量级Linux发行版。它采用了musl libc和busybox以减小系统的体积和运行时资源消耗,同时还提供了自己的包管理工具apk。Alpine 的内核都打了grsecurity/PaX补丁,并且所有的程序都编译为Position Independent Executabl
    03-08
  • 日志审计与分析实验三(rsyslog服务器端和客户端配置)(Linux日志收集)
    日志审计与分析实验三(rsyslog服务器端和客户
     Linux日志收集一、实验目的:1、掌握rsyslog配置方法2、配置rsyslog服务收集其他Linux服务器日志:C/S架构:客户端将其日志上传到服务器端,通过对服务器端日志的查询,来实现对其他客户端的日志进行集中管理;下面实现就是通过两套机器来实现,(server:19
    03-08
  • Linux学习系列--如何在Linux中进行文件的管理
    Linux学习系列--如何在Linux中进行文件的管理
    文件在常见的Linux的文件系统中,经常使用能了解到的文件管理系统是分为多个文件夹进行管理的。如何查看文件路径 pwd ,在文件目录中,会有一个点(.)代表的是当前目录,两个点(..)代表的是当前目录的上层目录在Linux下,所有以点开始的文件都是“隐藏文件
    03-08
  • [JetBrains] 我想在 Linux 上使用 macOS 键绑定!
    [JetBrains] 我想在 Linux 上使用 macOS 键绑定
    很高兴认识你,我的名字是kitakkun。我最近开始实习,是工程界的新手。顺便说一句,这是我的第一篇文章。你最喜欢的操作系统是什么?视窗?苹果系统?还是Linux?我将它们全部用于不同的目的,但感觉就像 macOS ≒ LinuxWindows。一两个月前,我最喜欢 Linux
    03-08
  • linux 配置Socks51
    linux 配置Socks51
    ***大家耳熟能详,但是socks用到的人比较少,那什么是socks呢?请看第二段或者百度百科,socks分别有4和5两个版本,现在5为主流。工作中经常用***访问国外,但是同时国内的速度又慢了,让人很纠结,实际上这个时候可以考虑使用socks。指定某一个程序使用国外s
    02-10
  • linux下如何单独编译设备树? linux设备树是什
    答: make vendor/device_name.dtb  如: make freescale/fsl-1043a-rdb.dtb
    02-10
  • linux下mysql开启远程访问权限及防火墙开放3306端口
    linux下mysql开启远程访问权限及防火墙开放3306
    开启mysql的远程访问权限默认mysql的用户是没有远程访问的权限的,因此当程序跟数据库不在同一台服务器上时,我们需要开启mysql的远程访问权限。主流的有两种方法,改表法和授权法。相对而言,改表法比较容易一点,个人也是比较倾向于使用这种方法,因此,这
    02-10
  • 移植linux3.7到nuc900系列开发板遇到的问题
    通过移植学习linux新版本内核,大概了解一下内核变化。记录一下移植过程中遇到的问题或值得注意的地方。1,添加一款arm9芯片的支持首先修改\arch\arm\tools\mach-types文件添加一行w90p950evbMACH_W90P950EVBW90P950EVB同目录下的脚本文件在编译内核时会根据
    02-10
点击排行